Split-Sleeves are repair fittings that can be used to seal leaks caused by corrosion or damage on onshore and subsea pipelines.
Split+Sleeves are easy and safe to install. The leak is sealed once the fitting is fully torqued on the line.
For a permanent repair, the fitting can be welded to the pipeline while it is under flow.
Fittings not welded to the line can be removed, reconditioned by and put back in the customers safety stock.
Steel GirderRings prevent displacement & damage of packing during installation.
Standard working pressure is 1000 maop. Higher working pressures are also stocked and various lengths are available.
STANDART BODY MATERIAL SA-A350 Gr. LF2 Cl1 SA-A516 Gr. 70
Standard bolting is SA-A193 Gr. B7 with SA-A194 Gr. 2H nuts
| TECHNICAL | SPECIFICATIONS |
|---|---|
ANSI Pressure Class | 300-400-600-900-1500 |
Designed Based On | ASME Sec. VIII, API 6H, ANSI B31.4, B31.8 |
Body Material | Body materials: A216 WCB, A216 WCC, A352 LCC, A516 Gr.70 (Suitable for normally corrosive services) |
Stud Material | A193 Gr. B7 |
Nut Material | A 194 Gr. 2H |
Coating | Yellow Epoxy Polyamide, standard or Marine epoxy The highest quality NBR or VITON elastomer seal precisely compatible with the line fluid and ambient temperature will be installed into the split sleeves |
NBR Temprature Range | - 20 °C to + 80 °C |
HBNR Temprature Range | - 20 °C to + 150 °C |
VITON Temprature Range | - 20 °C to + 200 °C |
| Available Dimensions | 2-48 inch |
